Sign in with
Sign up | Sign in
Your question

Help with P8P67 Le Rev 3.0

Last response: in Memory
December 23, 2012 11:47:59 AM

I stopped going three days the PC, I go to turn it on and it gives me 1 long beep and 3 short beeps, and does not give me anything on the monitor.

P8P67 Le Rev 3.0
i5 2500K
Corsair CX-600W V2

Already did a BIOS reset removing de battery, no success...
Took all the DIMMS out (4x2GB) testing 1 by 1, no success...
Tryied push the "MemOk!" button on the MB, no success...

Anyone know what is happening and how to fix it?

More about : p8p67 rev

a b } Memory
December 23, 2012 1:32:40 PM

Hi, 1 long 3 short stands for VGA issues. If you have a spare graphics card, install it and test. Or test the 560 in a different PC.
December 23, 2012 2:14:56 PM

You are right, tried the 560ti on another PC and worked like a charm. After that I put the 560Ti in the 2nd PCIe and it worked. So the 1st PCIe are broken right? :(  New MB?
Related resources
a b } Memory
December 23, 2012 2:17:48 PM

Hard to say. Try reinstalling the CPU and check the CPU socket for bent pins. Adjusting the CPU cooler (not overtightening it) might also help.
December 23, 2012 2:25:41 PM

Now that you are saying that, when i mounted the PC on the first day, there was some bent pins, but it worked properly since then to today..
December 23, 2012 2:32:33 PM

There are any inconvenient using the 560Ti on the 2nd PCIe all the time?
a b } Memory
December 23, 2012 2:32:50 PM

You can try straightening them. Carefully and patiently. A magnifying glass would help.
a b } Memory
December 23, 2012 2:36:30 PM

Not sure if it runs at 16X. Check with CPU-Z or GPU-Z. Not that 16x vs 8x would matter in terms of real world performance.
December 23, 2012 2:43:16 PM

I am with the 560ti on the 2nd PCIe, and on the CPU-Z says on Graphics Interface "Version Interface: PCI-Express; Link Width: x2; Max. Supported: x16"

Is that "x16" you talking about right? Can you say now if the 2nd PCIe can run the 560Ti alone without any inconvenient?
a b } Memory
December 23, 2012 2:49:17 PM

Well x2 is not what you want. x8 would have been OK but not x2. I would uninstall the CPU and try straightening the pins. Or RMA the board and hope that ASUS would accept it.
December 23, 2012 2:53:13 PM

Hmm ok man, thank you for all the help ;)  Btw if I need to buy a new board what do you advise for my PC? without exceeding €160 +/-
a b } Memory
December 23, 2012 2:58:33 PM

A Z77 board, Gigabyte or ASUS. The rest depends on the features you need (PCI slots, USB, SATA a.s.o.). You can use newegg for selecting one (the left panel, in motherboards).
December 23, 2012 4:19:32 PM

Just did uninstall the CPU and tried to found bent pins, found 1 and I straight it. Installed again the CPU and cooler, put the 560ti on 1st PCIe and did the same thing (1 long, 3 short). Maybe I will buy a new board :X

That one is better than mine? ASUS P8Z77-V LX
a b } Memory
December 23, 2012 5:01:55 PM

At this point I'm not sure if it's a board issue or a CPU one. Can you RMA them? If not, maybe testing them at a local shop?
December 23, 2012 5:04:57 PM

I can try..
December 23, 2012 5:13:40 PM

But almost certainly it's a board issue...