Almost Done!

[jckstein]

Im really sorry for starting yet another thread, but I hope this will go quickly.

I have decided against building a system that has overheard for SLI, as I will most likely just stick with a single card setup for a while.

Lets hope this is painless. Point out any major flaws (look carefully at psu).

CPU: i5 2500k
GPU: gtx 580 lightning
RAM: Ripjaw X 8gb 1600mhz
Mobo: AsRock Extreme4 Gen3
PSU: Seasonic X650W
Case: Corsair 650d


I will be playing at 1680x1050 for the time being (until christmas most likely)

how does this look?

 

[lightus]

That should be able to run everything at max right now, especially at 1680x1050.

The PSU wattage is good for a single card, but you may run into problems if you wanna SLI in the future. Since you don't care about that, you should be good! I haven't heard of Seasonic so I can't comment on their reliability. I'm a Corsair fan myself.

 

[vx53c]

If you are planning on getting a 27"+ monitor then your setup rocks. If you are planning on getting something for 24" or lower then the gfx card is an overkill.

 

[jckstein]

Don't worry, I'll be getting a nice monitor in due time

Will I still be able to OC my CPU and GPU when using a 650W psu

 

[jckstein]

any more opinions?

 

[vx53c]

Yes your PSU will be enough. Kind of expensive but this is a gold rated psu.

 

[jckstein]

So everything looks good? Im clear to order?

 

[vx53c]

You didn't mention anything about OC the processor or an aftermarket heatsink. If you are planning on a solid aftermarket cooler the ripjaws are a tiny bit taller than they should be to accommodate most coolers. Patriot has a killer offer today:
http://www.newegg.com/Product/Product.aspx?Item=N82E16820220570
Pretty much the same in every regard only lower profile so that you won't have to worry about air coolers. If you are planning on watercooling then any will do.

 

[jckstein]

Yea, cooling systems will come later. I dont plan on OC'ing for a little while, so stock fans will be fine.

 

[dish_moose]

So save yourself a headache later & get the lower profile as suggested. Also for the price of a 212 EVO cooler - again - save yourself a headache later & install it when you put your machine together.
-Bruce