/ Sign-up
Your question

Voltage question

  • Memory
  • DDR3
  • Intel
Last response: in Memory
December 27, 2012 8:29:35 PM

Sorry, I've been asking a million questions the past few days. Upgrading my old machine for my wife and building a new one. This is a question on the old. It's a:
EVGA 141-BL-E757-TR LGA 1366 Intel X58 ATX X58 SLI LE Intel Motherboard
Intel Core i7-920 Bloomfield 2.66GHz LGA 1366 130W Quad-Core Processor

I had this memory in it: OCZ Platinum 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Voltage

which went bad, so I picked this up to replace it while I redid the drives and reinstalled

CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

But then I noticed the OCZ was 1.65 volt and the Corsair is 1.5. Will that be okay? Do I need to specifically set it in the bios or anything? Trying to do two machine at once, and appreciate the help.

More about : voltage question

Best solution

December 27, 2012 8:36:20 PM

It will work fine.
December 27, 2012 9:14:12 PM

Short, sweet, and I appreciate it! Just wanted to make sure I didn't have to change anything of if the bios picked up what to do.
December 29, 2012 4:31:08 PM

Best answer selected by lucasbuck2.