Closed Is it safe if one motherboard hole isn't mounted on a standoff? Tags: New Build Cases Computer Motherboards Systems Last response: December 2, 2011 10:25 AM in Systems Share TheRedStorm November 21, 2011 4:19:53 AM I'm currently doing my first computer build, but I have run into a strange problem. the case doesn't have a hole to put a standoff in where one of the motherboard mounting holes are. That would mean all but one hole would be screwed in. Will the computer still work if its like that? My motherboard: GIGABYTE GA-Z68AP-D3 My case: Thermaltake Element G Thanks More about : safe motherboard hole mounted standoff Best solution abekl a c 128 V Motherboard November 21, 2011 4:53:00 AM One hole missing a standoff generally isn't a problem, and shouldn't affect the operation of the computer at all. Share TheRedStorm November 21, 2011 4:53:57 AM hmm... I'm starting to wonder if my motherboard is even compatible with the case... The case says "Motherboard compatibility: Mini ATX and Full ATX" My motherboard says it's "ATX Form Factor - 30.5 cm x 21.5 cm" Score 0 Related resources Is it ok to put a loose standoff under motherboard is the case is missing the hole? - Forum Missing 1 standoff hole - still safe? - Forum Only one motherboard standoff - Forum More motherboard mounting holes than motherboard standoffs - Forum What to do with a mounting hole which isn't? - Forum Can't find your answer ? Ask ! Get the answer TheRedStorm November 21, 2011 4:59:20 AM abekl said:One hole missing a standoff generally isn't a problem, and shouldn't affect the operation of the computer at all. Ok... I'll see if it works... it won't damage my parts on the motherboard, will it? Score 0 TheRedStorm November 21, 2011 8:27:43 PM Will it still work if one hole on the motherboard isn't mounted? Score 0 Rosebud November 22, 2011 1:47:10 AM that mobo not for that case Score 0 Rosebud November 22, 2011 1:49:43 AM I would bet you will have more problems Score 0 TheRedStorm December 2, 2011 12:46:02 AM Best answer selected by TheRedStorm. Score 0 Can't find your answer ? Ask ! Publish Related resources Need Help With Motherboard Standoff Holes Forum HAF 932 Advanced Case Stand-off Screw Not Fitting To Mount Motherboard Forum SolvedOne CPU fan clamp isn't flush with others on back of motherboard Forum One screw won't go in to the motherboard standoff Forum SolvedForgot standoffs, but haven't turned on the computer yet. Safe to use motherboard? Forum Can mounting a motherboard without standoff screws ruin the board? Forum SolvedOne of my MotherBoard standoffs is playing up? Forum SolvedIs mounting an SSD behind a motherboard safe? Forum SolvedSilver points arround motherboard holes for standoffs. Forum Motherboard slightly warped, doesn't lay against one screw hole. Forum Help with Raised Standoffs not matching with Motherboard holes Forum motherboard trace damage near CPU fan mounting holes? Forum Case came with only 9 standoffs, motherboard has holes for 10. Forum Mounting Motherboard without brass standoffs? Forum Motherboard Mounting Holes Out Of Alignment (I Think I Need To Drill) Forum More resources Read discussions in other Systems categories Homebuilt New Build Prebuilt Cases Power Supplies RAM CyberPower !