Case Fan Connectors on the Motherboard

Hello All,

I am in the middle of my first build and I have a simple question regarding the case fan male connector/pins I see on the mobo : CPU fan, sys Fan 1 and sys Fan 2; I know that I will connect the CM 212 EVO which is setup in a push/pull configuration to the CPU fan connector. However, I have six additional fans in my case.....x4 120mm fans, x2 200mm fans but I only see the x2 sys Fan (4 pin) connectors on the board. Do I connect them into the power supply into the x6 peripheral cable inputs on the PSU or somewhere else on the mobo?

System specs:
Sapphire Radeon HD 7850 2G DDR5 PCIE 3.0
Cosair GS 700
Intel Core i5-3570K 3.4GHz Quad Core
Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing
Gigabyte GA-Z77-D3H-MVP mATX LGA 1155
Corsair Vengeance 4GB (2x 4GB) DDR3-1600
Crucial m4 256GB 2.5-Inch Solid State Drive SATA 6Gb/s
Seagate Barracuda 3TB 3.5" 7200 RPM
Seagate Barracuda 1TB 3.5" 7200 RPM
Cooler Master HAF 912 ATX Mid Tower
Asus BC-12B1ST-BLK/B/AS Blue-Ray Reader, DVD/CD Writer

:o :o :o :o :o :bounce: :bounce: :bounce: :bounce: :bounce:
3 answers Last reply Best Answer
More about case connectors motherboard
  1. Best answer
    You can use two of the fans on the board and the rest you connect directly to the PSU usually to a 4 pin Molex.
  2. Best answer selected by Knightfarley.
  3. Thank You :pt1cable: Greatly!
Ask a new question

Read More

Gigabyte Cases Fan Motherboards