Hi i have a problem with my memory
2 days ago was ok pc detect all mem witch is 1.5gb , but i get a BSOD and new detect 768 witch is a half if i use the 1gb module he detect a half again (512mb) if i use the 512mb module he detect 256 any ideea
In bios detect 768mb but i make a teste : http://postimage.org/image/p0verewe9/ and she look fine but still detect a half i also try msconfig with memtest i wait for any halp
pull power from the wall..clear the cmos with the mb jumper. take all the ram out look for any bent pins or dirt. with a flashlight look to see if there any discolored chips or caps near the ram slots. (could have memory controller issue). with one dimm have you put it in every slot to see if one of the slots or ram sticks went bad??