Alright, so the computer worked 100% until I went in the BIOS and applied a VERY minimal over clock from 2.8ghz to 3.3ghz. I increased the voltage from stock to 1.35v on my AMD X6 1055t. After that I rebooted my my monitor never recognized my computer again so I RMA'd the GPU, CPU & MOBO. I've tried new ram and a new PSU as well. Still getting "No signal" I have also tried a different monitor as well. I've also tried resetting the BIOS with jumpers like it said in the manual and removing the battery to reset the CMOS. I even used different RAM in different slots as well. I have done almost everything and need help.