B75 PRO3+i3 3220

Tags:

Last response: January 13, 2013 2:18 PM in Motherboards

93149030

January 13, 2013 2:35:29 AM

hi：
A week ago，I bought some DIY stuffs，B75 PRO3 and i3 3220 included。(no independent graphics card )Here is a serious problem：
After win7os instllalion completed，I start to install the drivers，once I finished the intel HD graphic driver，then restart，after the win7 blog showing a few seconds，the monitor loses signal and blackout。when I restart and go to save mode，uninstall the HD graphic driver，It can be restarted and see the desktop。
I have tried many versions of the HD graphic drivers，also tried many win7 OS and softwares ，but it didn't work.
Thanks。

More about : b75 pro3 3220

| E-mail me updates
| Report abuse

Reply to 93149030

kovzone

January 13, 2013 1:51:47 PM

so there must be a problem with PCIe for your gpu. Have you tried another PCIe?

| Report abuse

Reply to kovzone

GhislainG

Motherboard Master

January 13, 2013 2:06:59 PM

kovzone said:

so there must be a problem with PCIe for your gpu. Have you tried another PCIe?

The OP didn't install a discrete GPU.

To the OP, what type of monitor are you using? Can the default monitor be configured in the BIOS or the drivers once installed (and before rebooting the system)?

| Report abuse

Reply to GhislainG

kovzone

January 13, 2013 2:18:45 PM

oh, I lost focus because he keep repeating HD graphic driver.

If in save mode it's work fine then don't you think the problem is with the driver?

edit: yes GhislainG is right,, there could be some monitor issue

| Report abuse

Reply to kovzone

Ask the community

Related ressources:

Read discussions in other Motherboards categories

- BIOS
- Boot
- Chipsets
- ASRock
- Asus
- Chaintech
- DFI
- Elitegroup
- FIC
- Foxconn
- Gigabyte
- Intel
- MSI-Microstar