Gigabyte 6870 wont work

[Vegetto991]

I just uninstalled my old 4890 went to safe mode and cleaned up the amd files old driver stuff

then as soon as I put in the new card and went to boot it said "the system has experienced boot failures because of overclocking or changes in voltages. Last settings in this page may not coincide with current H/W states.


my new card is model number GV-R687OC-1GD

here are my system settings


my system setting are

AZZA Solano 1000R
GIGABYTE GA-X58A-UD3R
4gb gskill ddr3
Intel Core i7-930
OCZ ModXStream Pro 700w18

 

[C0rehound]

Go into the BIOS and load "Optimized Defaults" then reboot. Once you get it to boot you can go back and re-tweak the BIOS if need be.

 

[Vegetto991]

Go into the BIOS and load "Optimized Defaults" then reboot. Once you get it to boot you can go back and re-tweak the BIOS if need be.

dumb question but if after doing that nothing pops up am I good to go

 

[C0rehound]

If it's POSTs and gets into Windows then yep, load your drivers and get to fraggin!

 

[Vegetto991]

Best answer selected by vegetto991.

 

[Mousemonkey]

This topic has been closed by Mousemonkey