comasus

Distinguished
May 17, 2009
8
0
18,510
I have an Intel Pentium D 925 Processor 800MHz

will it work with DDR3 1333 in gigabyte mother board G41MT-S2P??
 

laircouk

Distinguished
Jan 28, 2012
170
0
18,710
Seriously, the answer is YES! :) Your motherboard supports socket 775 and will use 2 x DDR3 1333 (O.C). However, you may have to increase the voltage of the ram or it might just be incompatible with your board.
 

comasus

Distinguished
May 17, 2009
8
0
18,510



But the processor fsb is 800Mhz is not matching to the RAM does it make any problem?
 

laircouk

Distinguished
Jan 28, 2012
170
0
18,710


Your processor Pentium D 925 runs @ 3.00GHz x 2 (800MHz FSB). It will be fine. But, again, please read my previous post if you are going to use 1333MHz Memory.
I have edited my post, because, I have to double check my documents (Microsoft Excel table) regarding your motherboard and processor. Sorry about that.

Apart from that, your motherboard should have a modifiable memory multiplier that'll allow you to increase memory speed to 1333MHz without touching the FSB.
 

laircouk

Distinguished
Jan 28, 2012
170
0
18,710


Hey, 1333MHz is a hit or miss if he can stabilize voltages and multiply the memory properly. If not, It may cause a loop - reboot or refuse to boot.
Well, he's asking for OC type memory after all...
 

benjamincakir

Honorable
Mar 21, 2012
143
0
10,690


Still, it's slow...go with 2133! Yea! Fastest Ram!
 

laircouk

Distinguished
Jan 28, 2012
170
0
18,710


Yes, only if you know how to use the motherboard's multiplier and increase voltages properly without killing it. It's your computer, your hardware...




 

comasus

Distinguished
May 17, 2009
8
0
18,510



Will it not adjust automatically for the above stated mb?
 

laircouk

Distinguished
Jan 28, 2012
170
0
18,710


You will / may need to adjust it manually. It depends... so check your Bios configuration once you have the correct type of memory.