Uses Philips ARM LPC2106 microcontroller with 128kbyte Flash and 64kbyte
SRAM.RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V
tolerant I/O, up to 60MHz operationRTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS,
7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
2. Two on board voltage regulators 1.8V and 3.3V with up to 800mA current
on-board
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.