Bios Update

http://support.ts.fujitsu.com/Download/ShowFiles.asp

You don't have a floppy drive, or you don't have a floppy disk? They are pretty cheap and they do come in handy when working with computers, still. You can also still purchase the floppy disks also.

You'll have to find out if you can boot to a USB drive. If not, you'll have to make a bootable cd-rom disk and update it that way.

Does the system already have a working processor on it? if so, the link contains a file to update the bios from within Windows.

wow,that was fast,thank you,unfortunaly when i select os win7 cant open the page "Unable to load the webpage because the server sent no data." Any alternative?thank you

cpu is working,i dont have flopy drive,i just need that bios for flashing,the rest i think i can do with a tutorial,i can boot from usb i think

http://support.ts.fujitsu.com/Download/Showfiles.asp?OS... Independent (BIOS, Firmware, etc.)-Childs=0&OSText=FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF_OS Independent (BIOS, Firmware, etc.)_True

Keep trying that page, I got it the first time, but the 2nd time it took me a few tries.

I don't see one listed for Win 7. I see one of course for Dos, Win 2000, and XP.
So those are your choices.

if you get the page cannot be found or error message, just try and drill-down and select your model from the page..."mainboards" etc.

i am trying...here is my info from cpu-z
intel pentium D 820
socket 775 lga
2.8 ghz 2 cpu

motherboard: fujitsu siemens
model: D2151-A1
chpset: intel i945P/PL/G/GZ

Bios: fujitsu siemens // phoenix technologies ltd.
version:5.00 R1.01.2151.A1
date:26.04.2005

ram ddr2 2x1 gb

graphic card geforce 8500gt 256(512) mb 128 bit


still wont open

i found this but i dont know will it work http://www.updrivers.com/bios/Motherboard/Fujitsu-Sieme...

i opened the page,now i don't know which of these i need to download http://support.ts.fujitsu.com/Download/ShowFiles.asp

You would only be able to use the dos one. which is labeled as: Flash BIOS Update - Boot Disk

i downloaded,its exe file, i didnt double click on it  

you need to make your usb thumb drive dos bootable, then you can update the bios

i make my usb bootable with hp usp disk storage tool,but when i come into bios there is no option for flashing bios,what should i do now

If it boots you into dos, you would then run the downloaded file. You should be able to copy the file onto the USB drive also.

it wont boot from usb,its booting from hdd,i select in bios to boot from usb but it boot from hdd and then windows start normaly.this is i litle anoying...

yeah, you have to make the usb drive bootable.

maybe i did something wrong while trying to make the usb drive bootable.i will search for other tutorial for usb,or,maybe you have one  

I didn't download the bios files, so I'm not sure if it already included the necessary dos boot files or not.

If not, you can download them from a place like bootdisk.com for dos. or freedos.com

Then you can use your HP boot disk software and point that to your downloaded dos files to make it bootable.

finaly i menage to boot from usb,now when boot from usb dos is apear and i dont know the comand.I put downloaded file from your link (FTS_FlashBIOSUpdateBootDisk_500109_1005545 (this is the name),when double click i have option for write to flopy,cd, or just to extract.I just extracted to a folder named gumish and place him into bootable usb.Restarted pc and here is a dos.what next,how to run bios update?

you would boot to dos with the usb.
once it is booted to DOS,
type: cd gumish and press the Enter key.
Then you would type the name of file that contains the bios.
If you tell me the names, I can tell you which one to type.

DISK.BIM file,nothing else

my mistake,here is the file names
A2151_A1.OMF
AUTOEXEC.BAT
BIOFLASH.EXE
C2151_A1.OMF
CHANGES.TXT
COMMAND.COM
D2151_A1.OCF
KERNEL.SYS
M2151_A1.OMF
P6_INTEL.P4
P6_INTEL.TXT

you can run the autoexec.bat file by typing the name. It should launch the biosflash.exe.

nothing hapening when type autoexec.bat,the cursor moves to the next line and just blinking,in the next line nothing is writen,there is just a blinking cursor.When i pres almost any key the bios sound is apear.I put out usb and restarted the pc,everything is normal again.any sugestions on that?

what happens when you run bioflash.exe from the dos prompt?

nothing happens,i got a message something like-file not recognisible as batch executable file-i cant remember.I forgot to mention that autoexec.bat is not visible on usb but it is there,becouse when i copy again downloaded bios on the bootable usb drive ask me to replace that file,I had to download also dos files for usb which give me a lot of trouble to find matchable dos becouse when i tried to format with hp tool i was getting error message something like-cannot format becouse dos files are not compatible with fat32-then i found win98boot files on internet and used them during formating usb.Then i placed bios files on usb.2 of them are invisible.I set boot priority to usb and then i restarted and the dos comes up

I don't have the downloaded files, but you probably have to type:
bioflash.exe A2151_A1.OMF

Replace the autoexec.bat with the one from Fuji
I would then type this: bioflash.exe D2151_A1.OCF

thank you man,i did it   Idid just like you told me  

problem iz that i cant find latest bios,this is the version from 2006.,mine was from 2005 .

huh?