No Post, But everything is on

[nighteyes]

Hello,
I just built a new system and can't get any post data to show. But everything is running. here is my config:
GIGABYTE MB-990FXAUD3 Rev1.1
CPU: AMD FX 8120
GPU: NVIDIA 9500GT
RAM: DDR3 CORSAIR 8GB 1600Mhz
CORSAIR H100
PSU: Thermaltake 600W
All of this is brand new hardware. Any ideas as to the culprit?

 

[thently]

Video card. Most likely it is posting you just cant see it. have any other video card laying around? Try reseating the ram too..

Thent

 

[kajabla]

My guess is that you've got your monitor plugged into the motherboard instead of the graphics card. That's a classic. Read through if you've got it plugged in right: http://www.tomshardware.com/forum/261145-31-perform-steps-posting-post-boot-video-problems

 

[nighteyes]

I've tried a secondary graphics card, that didn't work. I tried pulling all the RAM, that didn't work either. This board does not have on boards graphics. I am going to try pulling the board out of the case and see if it will post that way. I don't even get any beeps when it powers on so I can't try to figure it out that way.

 

[nighteyes]

Problem solved, MB was grounding out on case. Thanks for all the pointers though.

 

[kajabla]

Sounds good.

 

[nighteyes]

Best answer selected by nighteyes.