How to connect front panel of the case to mother board?

[chrikov90]

Can anyone help mi with connecting the front panel from the case to the MB ECS G31T-MC V(1.0) How to connect reset sw, hdd led. msg led, power sw. Tried with some schemes power sw is working perfect, msg led i working perfect but the reset sw won't work and the hdd led

Thanks.

 

[alexoiu]

You can find the manual here http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=812&CategoryID=1&MenuID=16 - page 24.
Check firstly if it's the manual for your board.
The HDD led - check polarity. For reset it doesn't matter.

 

[chrikov90]

You can find the manual here http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=812&CategoryID=1&MenuID=16 - page 24.
Check firstly if it's the manual for your board.
The HDD led - check polarity. For reset doesn't matter.

I already used that one that one is for G31-M V(1.0) but mine MB is G31-CM V(1.0)

 

[alexoiu]

I can't find the model on ECS. Have you bought the board separately or as part of a pebuilt PC?

 

[chrikov90]

I bought it separately it was a used one and it have 13 pins for front panel and that one on ECS side have 9 pins I will try all the pins maybe I'll find it

 

[alexoiu]

Check here http://support.gateway.com/s/MOTHERBD/FIC/105552/105552mvr18.shtml
See if the power sw. and power led match the position. If yes, then try the reset and the HDD led as specified.