Sign in with
Sign up | Sign in
Your question

ASUS P8Z68 Deluxe, Socket-1155

Last response: in Motherboards
Share
February 5, 2013 11:05:17 PM

Hi

My computer won't boot, not even POST. The Q-code says 30 right after boot, earlier it shifted between 45, 46 and 49. The DRAM LED is red, and I'v tried the MemOK function without success. I'v also tested with one RAM stick in each slot one by one. I'v also reset the BIOS both by removing the CMOS battery for ~10 min. and with the clear CMOS button.

My specs is:
ASUS P8Z68 Deluxe, Socket-1155
Intel i7 2600
Corsair Vengeance DDR3 1600MHz 16GB

Thanks in advance
a c 150 Ĉ ASUS
a c 558 V Motherboard
February 6, 2013 3:58:06 AM

Hi, Try taking the board outside the case and reinstalling the CPU. Check the CPU socket for bent pins.
February 6, 2013 7:49:23 PM

Hi, after removing the CPU (no bent pins at the socet btw), and inserting it again I got mem. error, went trough the MemOK function. After that it went straight to Q-Code 30.

In other words, same situation as before
Related resources
a c 150 Ĉ ASUS
a c 558 V Motherboard
February 6, 2013 8:17:55 PM

Then try RMA-ing the board. I would RMA the CPU too.
April 16, 2013 9:41:02 PM

every time you turn on the pc board that displays q-code 72, I have to go several times to reconnect power to operate, can say why?
!