Sign in with
Sign up | Sign in
Your question

I recently tried to install more memory on my windows vista from 1gb..

Last response: in Memory
Share
February 19, 2013 9:58:19 PM

To 2gb, and i was told my crucial to use this
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=8D...
i tried to put the ram into my computer and it wasn't fitting into the slots, but i could be putting it in wrong im not experienced.
What i want to ask is, is this the right ram for my computer?

here's my information.

CPU Arch : 1 CPU - 2 Cores - 2 Threads
CPU PSN : Intel Celeron CPU E1200 @ 1.60GHz
CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T
CPUID : 6.F.D / Extended : 6.F
CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 512 KB
Core : Conroe (65 nm) / Stepping : M0
Freq : 1599.93 MHz (199.99 * 8)
MB Brand : ECS
MB Model : 945GCT-M3
NB : Intel i945G rev A2
SB : Intel 82801GB (ICH7/R) rev A1
GPU Type : Intel 82852/82855 GM/GME
DirectX Version : 11.0
RAM : 1024 MB DDR2 Dual Channel
RAM Speed : 333.3 MHz (3:5) @ 5-5-5-15
Slot 1 : 512MB (5300)
Slot 1 Manufacturer : Hyundai Electronics
Slot 2 : 512MB (5300)
Slot 2 Manufacturer : Hyundai Electronics



a b } Memory
February 20, 2013 2:51:08 AM

Yes. RAM comes out easier than it goes in. Make sure it's not back to front (there will be a slot in the ram that lines up with a piece of plastic on the slot) and that the clips are in the open position (facing outwards) line the notch up first and press firmly at one end, once it pops press firmly at the other end to close the second clip. To be honest it's much easier to watch a you tube video to see how it's done.
m
0
l
!