- Feb 22, 2013
- 1
- 0
- 10,510
I got a new case, and have never used the single and double pin connectors for the front panel. Anyways, I ended up connect the 2-pin Power Switch connecter to the positive power switch pin and the negative reset switch pin (I am an idiot 
). Powered up the computer, everything seems fine, power it down, try to power it on again and nothing happens.
The motherboard ethernet light still blinks when connected to the PSU but not even the fans spin when you hit the power button. Tried it with the old case's power switch connected and still nothing. Any help or suggestions would be great at this point.
If it matters, the motherboard is an MSI 760GM-P34FX.
http://www.msi.com/product/mb/760GM-P34--FX-.html
). Powered up the computer, everything seems fine, power it down, try to power it on again and nothing happens.The motherboard ethernet light still blinks when connected to the PSU but not even the fans spin when you hit the power button. Tried it with the old case's power switch connected and still nothing. Any help or suggestions would be great at this point.
If it matters, the motherboard is an MSI 760GM-P34FX.
http://www.msi.com/product/mb/760GM-P34--FX-.html
Facebook
Twitter
Instagram