Sign in with
Sign up | Sign in
Your question

120mm drive bay fan???

Tags:
  • Power Supplies
  • Water Cooling
  • Fan
  • Components
  • Product
Last response: in Components
Share
April 15, 2012 12:17:11 AM

after finally deciding that I’m going to air cool my system rather than water cooling it I want to get as much air flow in my case as possible, I already have a 200mm in the front a 200mm at the top and a 120mm at the rear and I want another 120mm at the front to take up 3 drive bay slots.

My question is do you know of any cages or mounting thing that I could use rather than using zip ties?

Thanks for your time, Tom.

More about : 120mm drive bay fan

April 15, 2012 12:18:42 AM

Zip ties are definitely the best way in my opinion... but yeah. What case?
April 15, 2012 12:21:22 AM

its a CM Storm Enforcer, it does have a door covering the drive bays but it still has space around the edge for air flow. cheers
April 15, 2012 1:49:37 AM

I'm assuming you want to leave the front door on the case correct? I don't really know if much air will move through there if you do though. The best thing I have seen is the Cooler Master 4-in-3 Device Module Harddisk cage ( http://www.newegg.com/Product/Product.aspx?Item=N82E168... ). It should serve your purpose and will allow for more hard drives if you want them. Just replace the stock fan if it doesn't work as good as you would like. I don't know what kind of fan you are looking to install but it might not make too big of a difference.
!