Just that, I'm doing a bottom up rebuild, got SATA IIs installed and running ok. Windoz 7 is booting fine but doesn't see a 40GB WD PATA HDD or an LG DVD ODD both on the IDE line. Yes, the cable is set correctly with the end of the 80pin cable on the master and the grey connector on the slave.
Interesting note, that the BIOS _can_ see both the IDE drives. When the system boots it displays the ide drives and when I list hard disks in the bios, there's the IDE HDD. The ODD only shows in the BIOS list when it boots.
Any suggestions would be appreciated. I'm talking to ASUS as well but little progress so far.