Sign in with
Sign up | Sign in
Your question

Please help me

  • Graphics Cards
  • Radeon
  • ATI
  • Graphics
Last response: in Graphics & Displays
November 8, 2011 9:31:32 PM

hi guys, I have a problem with my Ati Radeon Hd 4350, because it wont detect, i have a Acer Aspire M1645 with a Pentium Dual-Core E5200 2.50 Ghz and 3072MB Ram, and my problem is this Ati Radeon wont detect with VGA, i have two outputs one is for the Ati Radeon Hd 4350 and the other one is on onboard, and when I put in the Ati Radeon with vga wont detect, but detect the onboard

Regards, and i hope it will be solved

More about : question

a c 254 U Graphics card
November 8, 2011 9:52:35 PM

If you go into device manager and under display adaptors do you see the 4350 there? You may have to enable the card if it is there and says it is disabled.
November 8, 2011 10:01:20 PM

No it appears to me Nvidia Geforce 7050/ Nvidia nforce 620i wich is my onboard output
Related resources
November 8, 2011 10:07:57 PM

This sounds like a problem you would normally see with older motherboards but it still happens, go into your bios settings and disable your onboard video, connect your video card and see what happens.
November 8, 2011 10:09:42 PM

My video card is connected to the onboard....
a c 198 U Graphics card
November 8, 2011 10:17:21 PM

By "onboard" he means the graphics chip that is literally on the motherboard, not the graphics card.
November 8, 2011 10:18:24 PM

Yes, but when I put the Vga cable in the outpout of the graphic card it wont detect
a c 143 U Graphics card
November 8, 2011 10:43:10 PM

Hook you monitor cable to the "Built-In" graphics card, then go to your BIOS and disable it. Or make the PC boot from the Add-in gfx card.

Then turn off PC, hook your monitor cable to the discrete gfx card (HD 4350) and you should see singal from screen when you turn on your PC.

a b U Graphics card
November 8, 2011 10:43:58 PM

ok heres what you do, hook it up form the onboard WITH the video card plugged in, go into bios, disable the onboard and then save settings and reset, then unplug the vga from onboard to the card

do all of this while the 4350 is in there
November 8, 2011 10:46:33 PM

My bios is that acer mcp73ve, i dont know how to disable the onboard option from bios
November 8, 2011 11:02:39 PM

in the bios I go to Pnp/Pci Configuration and this appear to me
Palette Snoopin Enabled
Clear nvram no
Pci latency timer 64
Allocate irq to pci vga yes
Pci ide Busmaster Enabled