Sign in with
Sign up | Sign in
Your question

Is my 4850x2 dead?

Last response: in Graphics & Displays
Share
November 10, 2011 8:54:11 PM

I just installed new drivers then opened my case and cleaned some of the dust out and did some badly needed cable management. Now it seem to starts normally but the screen does not detect it and led d1250 is green and led d1255 is red.I want to play Skyrim tomorrow. :( 
Do I need a new graphics card. I was hoping it had some thing to do with the drivers.

More about : 4850x2 dead

Anonymous
a b \ Driver
November 10, 2011 9:06:36 PM

Try reseating the card and cables
m
0
l
November 10, 2011 9:13:45 PM

Ive tried that I even switched the pci e slot to see if that would work. I will do it again.
m
0
l
Related resources
a b \ Driver
November 10, 2011 9:20:45 PM

Make sure when you are doing this you have the psu unplugged , in order for any changes to be recognized you have to make sure the psu is unplugged from the wall outlet. Also It might not just be the cables attached to the card , if you have a modular psu they could have become unseated at the psu and not the card,
m
0
l
a b \ Driver
November 10, 2011 9:23:32 PM

Since this is a dual gpu can you plug the monitor cable into another port ?
m
0
l
November 10, 2011 9:29:24 PM

I think I might have to bring it to a store to see if its dead I wish i had another computer
to try it in. My motherboard doesn't think any thing is wrong.
m
0
l
November 10, 2011 9:31:14 PM

Yes it is dead berry it and buy a 6950.
m
0
l
Anonymous
a b \ Driver
November 10, 2011 9:32:50 PM

Dont you have warranty on it? (3 years standard with most brands)
m
0
l
November 10, 2011 9:39:58 PM

It only had a 2 year warranty I was thinking about getting a 6950. I don't know if i can I was really hoping to get some thing that was actually faster than my 4850x2.
m
0
l
!