Problems with sata 6g on an interl perl mb Tags: MSI-Microstar CGI SATA Motherboards ukjam March 3, 2013 7:29:13 PM My old board has PCIe x1 and the SATA 6G is x2. When I install the board the system hangs and I get no response at all. The boad is a MSI G41M-E43. Do you have any insight into what could be happening??? Thanks More about : problems sata interl perl Can't find your answer ? Ask ! Publish Related resources: ForumIntermittent SATA 3.0 ( 6G ) ports ASUS P6X58D-E, AHCI mode ForumSata 6G not working in Asus Bios ForumIs a $400 Revo drive really much faster than a normal SATA 6G drive? ForumSATA 6G on the ASUS P7P55D-E Motherboard ForumPCIe x8 or x4 Sata III controller card Forum[SSD] Kingston HyperX 3K 120GB with 140 mb /s write ForumPERFORM THESE STEPS before posting about POST/boot/no video problems ! ForumFPS and weird framrate problems - GTX 670 ForumSamsung 830 SSD Series 128GB SATA 3 not working properly ForumSATA 3 working at SATA 2 speed ForumASUS P6X58D Premium LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Mo ForumHelp with Marvell 9128 stuck at SATA 1 speed?! ForumP8H77-V LE Motherboard not detecting SATA devices? ForumP8Z68-V PRO SATA question ForumExtra PCIe card for SATA 3, good or bad? ForumWhy is Performance Worse With SATA III? ForumSATA 6 HDD Recognized by Window but Won't Work ForumIntel i5 3550p & AS Rock Z77 PRO 3 More resources Read discussions in other Motherboards categories BIOS Boot Chipsets ASRock Asus Chaintech DFI Elitegroup FIC Foxconn Gigabyte Intel MSI-Microstar !