MSI 970A-G46 PROBLEMS HELP!

[kavery1974]

hello

I just installed my 970-g46 mobo outside of case and am getting no video at all. I have all 4 lights up on the board, the fans on video card and cpu running 1 stick of 6gb ram in first slot and my hdd hooked up.

the stuff im running with is '

board: 970-g46
CPU: phenom II x6 1100T
GPU: radeon 5770 hawk
RAM: 6gb corsair ddr3 (3x2gb) 600MHz 8-8-8-24
PSU: Xion 1000k gaming series

so far i tried resetting jumpers from 1-2 to 2-3 for 10 seconds
resetting CMOS taking out battery.
completely reinstalling from scratch.
trying PSU on different machine

after all this i still have no video to screen this is first time i encountered this and am just a bit baffled on how to fix any help is nice thanks

i did notice that I am missing 1 mounting pin on case but not sure if that would be a issue

 

[rolli59]

You have power from PSU hooked into card and the card is a known working card?

 

[kavery1974]

yes the card is from my previous computer set up i was just changing out motherboards, am going to check monitor and cards on separate pc in bout 1 hr will check back to report findings.

I did try HDDs on separate machine and they all work fine cant test memory as i have mo other ddr3 boards to test on

 

[rolli59]

try with each ram stick in individually. If it does not work with any of them then it is the board that is bad. 3x2GB sticks are for triple channel boards like lga1366 you should use a dual channel kit for example 2x4GB.