Question regarding Case fans

[silentcontrast]

I have a Zalman z9 plus case, which comes with the ability to control 2 fans. I just want to confirm that plugging the fans into the fan controller also powers the fan?

There is only one connector that comes with each fan, so when I plug it into the fan controller, it MUST be getting powered from there too, right?

 

[sosofm]

Yes the fans are powered by the fan controller. Don't forget to give power to fan controller.

 

[fixxxer113]

Download the manual from this page:

http://www.zalman.com/eng/product/Product_Read.asp?idx=423

You will see (p. 15 of the pdf) it shows that the fan controller gets power using a 4pin molex connector connected to the psu. And it needs another molex connector for the temperature sensor.