Sign in with
Sign up | Sign in
Your question

Hey guys building a new monster computer need advice

Tags:
  • Components
Last response: in Components
Share
May 15, 2012 2:57:42 PM

Hello,

I work with a lot of post-production (university level stuff) programs like adobe after effects, premiere, also some 3D animation with cinema 4d....also I game....so that's like an indication of a great video card and a good amount of ram.


Here is my build:


Case: Antec Nine Hundred Black Steel ATX Mid Tower Computer Case with Upgraded USB 3.0

Motherboard:ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel

Power Supply:Rosewill BRONZE Series RBR1000-M 1000W Continuous@40°C, 80Plus Bronze Certified,Modular Cable Design,Active PFC"Compatible

Card Reader: Rosewill RCR-IC001 40-in-1 USB 2.0 3.5" Internal Card Reader w/ USB Port / Extra Silver Face Plate


Hard Drive:( 2)SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive


Keyboard: Saitek Eclipse II Illuminated Keyboard


BluRay Burner: LITE-ON Blu-ray Burner with 3D Playback SATA iHBS212-08 LightScribe Support

Sound Card:HT | OMEGA STRIKER 7.1 Channels PCI Interface Sound Card

Liquid Cooler:CORSAIR CWCH60 Hydro Series H60 High Performance Liquid CPU Cooler

Video Card: (2) MSI N560GTX-Ti Twin Frozr II 2GD5/OC GeForce GTX 560 Ti (Fermi) 2GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support

RAM:( 2) G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL


Cpu:Intel Core i7-990X Extreme Edition Gulftown 3.46GHz LGA 1366 130W Six-Core Desktop Processor BX80613I7990X



Sorry about the order of the list, I know some components are more important than the other.


Any advice would really help!
Thanks!

More about : hey guys building monster computer advice

May 15, 2012 3:11:21 PM

I would lower the power supply, you won't need 100W, 750W would be fine. Don't get a LGA 1366 CPU, it's getting phased out and it's not as good as it's Ivy Bridge/Sandy Bridge counterparts. Get an i7-2600K if you plan on overclocking, if not, get the i7-3770. Getting these mean you'd have to change the motherboard, go for a Z77 chipset. If you're not overclocking then drop the H60 for a Coolermaster Evo 212+. Then put the money you save from the processor and the power supply into a better graphics card, or an SSD.
m
0
l
May 15, 2012 3:17:41 PM

thank you !
m
0
l
Related resources
May 15, 2012 7:03:24 PM

Actually what is your budget? That's very important. For the programs that you want to use, I would recommend Sandy Bridge-E (cheapest is i7-3820, mid is i7-3930K and high-end is i7-3960X), in an X79 motherboard. Also you might want to get 16 GB of RAM if you can afford it (this is cheap), and lastly an SSD, but only if you have some spare money since it's not very essential.

Two 560 Ti's 2GB each are not bad at all, but I don't think you need that much ram on your card, and maybe a single GTX 680 will outperform it and consume much less power (and I believe it will be around the same price as those two cards). Maybe even a GTX 670? Don't know about this.
m
0
l
May 15, 2012 8:47:02 PM

for video editing work yo'll probably want to upgrade to 4x8gb =32gb ram, and add another hdd or two so that you have at least a scratch disk preferably a system disk, scratch disk, and data disk. You do this so the drive can concentrate on doing just 1 thing. With only a single drive you have the heads moving to read a system file, then moving to get video data, moving again to write edited video data, moving again to read more data, moving again to write data. All that 'moving adds delays. I have 3 raid 0's in my editing rig.
m
0
l
!