Solved

TP-750 + Gigabyte GTX670 Windforce OC, how to wire up?

In the following link below you will see a table containing: Direct Cabling Connectors, for reference.
It lists two non modular pci-e connectors, both on different rails, they are the connectors of interest.

http://www.antec.com/pdf/manuals/TP-750_Manual_EN.pdf


Basically, there's two rails I can use at 25 amps each (rail 3 and 4).

Rail 3 non modular = 1 pci-e 6+2 connector.
Rail 4 non modular = 1 pci-e 6+2 connector.

Rail 3 modular = 1 pci-e 6 connector.
Rail 4 modular = 1 pci-e 6 connector.

From what I understand the Gigabyte GTX670 Windforce OC requires both 8 and 6 pin pci-e power connectors. Having said that, I NEED to use one of the non modular 6+2 connectors, the question is should I use the other non modular connector, which is on a different +12v rail.

Question 1.
Is 25amps (300watts) enough to power a single Gigabyte GTX670 Windforce OC at full load.

Question 2.
Is it ok to mix the two separate rails that are non modular? For example, connect both rail 3 and 4 to the graphics card?

Thanks
3 answers Last reply Best Answer
More about gigabyte gtx670 windforce wire
  1. Best answer
    1) Yes
    2) Yes
    I would use both none modular cables!
  2. Best answer selected by Simo606.
  3. rolli59 said:
    1) Yes
    2) Yes
    I would use both none modular cables!

    Excellent! Thanks very much. I appreciate it! :wahoo:
Ask a new question

Read More

Power Supplies Gigabyte PCI Express Components