Www routerlogin net

[blueyedgal30]

Hello,
hpow r u ?? mi wi fi stopped workin yesterday mornin and it was fine the nite before. mt husband pc works but not good and my wifi fones will not work and mi other pc will not pull wifi.o have used the codes on the wifi box nd still it dont work help please
i did not need any code wen i installed the box and now all ofr a sudden it needs the codes nd it will not take the codes on the box

 

[Saga Lout]

Hello and welcome to Tom's Hardware Forums.

Go Start then Run in XP - Windows key plus R in Vista and Windows 7, then type in the following, including all the spaces:-

cmd /k ipconfig /all

then press Enter and from the black form that shows up, take a note of the numeric code beside the Default Gateway icon - something like 192.168.0.1.

Type exit to close the black form.

Open Internet Explorer and enter that code into the URL address bar as though it was a website. You're then at the login page to the router's settings utility and admin will usually be the login with either admin or password as the password.

If you're in, seek out Wireless and then Security and take a note of the key. Sometimes it may be a passphrase, some a simple set of letters and others a hexadecimal code. You also may as well note which level of security it is - WEP, WPA or WPA/PSK 2 and then either AES or TKIP. Your computer will already know this but it's handy information to store. Note also that hexadecimal only contains numbers from zero to 9 and letters a to f so there's no confusion of I and O with 1 and 0.

Keep a note of that security key in My Documents and also outside the computer.

If you need more help when this thread has been inexplicably closed down, feel free to PM me.

 

[admin_15]

Hello,
hpow r u ?? mi wi fi stopped workin yesterday mornin and it was fine the nite before. mt husband pc works but not good and my wifi fones will not work and mi other pc will not pull wifi.o have used the codes on the wifi box nd still it dont work help please
i did not need any code wen i installed the box and now all ofr a sudden it needs the codes nd it will not take the codes on the box