Will this case fit my GFX card?

my 6870 (gigabyte) is 11.5" so it should fit

and the 212 evo is 6" tall so it should fit with ease

I have the sapphire version, pretty sure the casing sizes are different on all of these different versions. Also, this case is only 11"... so it wouldn't with yours.

11.5 x 3.5 x 6.5 inches ; 1.2 pounds says amazon, so nvm, it wont fit

http://www.newegg.ca/Product/Product.aspx?Item=N82E1681... heres a 60$ case with 12.4" of space for a gfx card

Linky: http://www.sapphiretech.com/presentation/product/?cid=1... <---Link updated
Sapphire states that their HD 6870 is 245mm and that is 9.84 inches (updated with edit); it will fit into the 690II. The 212+ is actaully 6.25 inches tall, but your case is 8.4 inches wide so the Evo will fit. NOTE: Standard 120mm/140mm fans are just under an inch thick and placing a fan in the upper slot on the side panel will likely interfere with the 212+ Evo. In other words you can use the 212+ or a side fan in the upper slot on the side panel...I'd go with the 212+.

Edit: Linked to the correct version of the Sapphire HD 6870. The card is slight longer at 9.84 inches, but will still fit.

I was asking if the Antec 300 would fit the card, not the 690II. The 690II is just my current case, which I'd have gotten if the card didn't fit in the Antec. Only clarifying, but thanks for answering it indirectly.


What would you guys suggest for a better fan? I heard the 212 Plus is about the same as the EVO, so I want to upgrade from the EVO. I'm hoping to OC my 2500k to 4.3-4.5GHz.

I've used the Antec 300 and just bought the Cooler Master yesterday from newegg. The Cooler Master is quite roomer than the Antec. The Antec is a good budget case but lack the cable management of the Cooler Master. At $50 after MIR the CM 692 is a excellent buy.

Best answer selected by Xerophos.