I have the P8H67-M EVO and have everything hooked up correctly, or so I thought. The board will turn on, but I am not getting any video via the VGA port. I have the EATXPWR plugged in, but there is nothing from the power supply to plug into the EATX12V. I have a 4pin and 6pin plug on the power supply, but I dont have an 8 pin. If I plug the 4pin or the 6pin it, computer wont boot, if I remove them both, the board will boot, but with no video.
Any suggestions, or more questions to try to narrow the problem down.
Thank you to anyone that helps me.
Any suggestions, or more questions to try to narrow the problem down.
Thank you to anyone that helps me.