- Dec 6, 2011
- 9
- 0
- 18,510
I have an MSI R5770 Hawk graphics card on an i7 with Biostar TZ68K+ mobo. I want to set up a dual monitor set up.
The graphics card has:
DisplayPort x 1
Dual-link DVI x 1
HDMI x 1
I also have have two monitors, and they are:
LG L1952S and Asus VW192s
Both are 19 inch monitors with only VGA ports on them. I have with me the following components:
2 x VGA-DVI adapters
2 x DVI-DVI cables
1 x HDMI-VGA cable
I tried connecting 1 monitor with the VGA-DVI adapter. It works fine. I connected the other monitor using the VGA-HDMI cable. It shows "Check Signal cable". When I swap the monitors, the one connected to the DVI port works.
As of now, the monitor connected to the HDMI port isn't getting detected.
What could be the problem? I have updated ATI CCC to the latest version.
The graphics card has:
DisplayPort x 1
Dual-link DVI x 1
HDMI x 1
I also have have two monitors, and they are:
LG L1952S and Asus VW192s
Both are 19 inch monitors with only VGA ports on them. I have with me the following components:
2 x VGA-DVI adapters
2 x DVI-DVI cables
1 x HDMI-VGA cable
I tried connecting 1 monitor with the VGA-DVI adapter. It works fine. I connected the other monitor using the VGA-HDMI cable. It shows "Check Signal cable". When I swap the monitors, the one connected to the DVI port works.
As of now, the monitor connected to the HDMI port isn't getting detected.
What could be the problem? I have updated ATI CCC to the latest version.
Facebook
Twitter
Instagram