Sign in with
Sign up | Sign in
Your question

New build issues

Last response: in Systems
Share
February 24, 2012 6:45:22 AM

I just put together a new system for a buddy of mine. I got the thing set up and running however after a couple reboots the computer stopped working. Now when powering on, it makes it all the way to the blue welcome screen for windows 7 and then goes to a black screen with only the mouse cursor on it. This happens every time. I tried starting over with the windows install and the same thing happened.

What could be the cause of this problem?


Components:
Intel BOXDH67BLB3 - Mobo
Intel i3-2120 - CPU
Gskill 2x4Gb DDR3 1333 Memory
Seagate 500Gb HDD
Corsair 430W PSU
LG DVD Burner
Power Cooler Radeon 5450 Vid Card

More about : build issues

a b B Homebuilt system
February 24, 2012 2:04:12 PM

Try the system again without the graphics card, if it still happens and you're not hearing warning beeps or a clicking hard drive I'd say it's most likely a faulty motherboard.
m
0
l
a b B Homebuilt system
February 24, 2012 3:16:59 PM

Did you do a fresh Windows install?
m
0
l
February 24, 2012 5:05:53 PM

is this happening after u install a software or driver for a Specific Hardware ? if so that HW must have a problem .
try doing a Fresh windows installation , and try to reboot after installing each driver .
then u'll find out where the problem is from .
m
0
l
!