I set a Linksys WRT54G router up as an access point connected to a D-Link DI624 router. When I set up the Linksys, I connected it directly to my computer and changed the IP address to 192.168.1.2 and disabled the DHCP. I then disconnected the Linksys from the computer, connected it with an ethernet cable from a LAN port on the Linksys to a LAN port on the D-Link and connected the D-Link to my computer. Both routers work perfectly but when I try to access the Linksys settings from my web browser it will not let me. I don't even get the login screen. When I run a diagnostic on the problem I get the following message:
Your computer appears to be correctly configured, but the (192.168.1.2) device or resource is not responding
Where have I messed up and how can I fix it so I can access the router?
Last replyBest Answer
More aboutaccess linksys wrt54g
check the IP on the DLink.
Dlink usually uses 192.168.0.1 as an IP scheme which means you need to change the IP of the Linksys to 192.168.0.2
Thanks a bunch! I set the IP address to 192.168.0.2 and it works perfectly.