Will this tech fit in this case? Gaming PC Rig

Hello,
This is the Gaming PC I want to build, but will all of this stuff fit in this case?

Case: Cooler Master Storm Scout

CPU: Intel Core i5 2500 (4 x 3.3GHz) 6MB

Memory: Corsair 8GB XMS3 PC3-10666 1333MHz (2x4GB)

Graphics Card: ATI Radeon HD 6950 2GB

Motherboard: Gigabyte GA-Z68MA-D2H-B3 (Intel Z68)

Network Card: Edimax Wireless LAN 300Mbps (PCI-E)

Power Supply: Corsair 700W Gaming PSU

Thanks.
15 answers Last reply
More about will tech case gaming
  1. Yes, it will fit.
  2. Which brand/variant of 6950 are you hitting?
    The Asus tripleslots are a little on the large side :-)
    Moto
  3. Motopsychojdn said:
    Which brand/variant of 6950 are you hitting?
    The Asus tripleslots are a little on the large side :-)
    Moto


    I am planning to use an Asus ATI Radeon 2gb.

    http://www.amazon.co.uk/Asus-Radeon-6950-DirectCu-Gaphics/dp/B004NBYCZ6/ref=sr_1_4?ie=UTF8&qid=1330703084&sr=8-4
  4. Only one? hehe
    those are the very beasties I was referring to, a shade under 30Cm

    So no, that will not fit in your case without some modding of the drive cage,
    http://www.coolermaster-usa.com/landing/scout/faq.php

    *Quote from that link,
    What is the maximum length graphics card supported?
    The CM Storm Scout is designed with portability in mind. It can accommodate the largest 280GTX or HD 4870 X2 type cards. This includes all GPU 10.5" or 267mm in length or shorter. GPU cards have a maximum clearance for 10.6" or 270mm maximum length inside the Scout**

    different card or case, or some modding on the horizon mate :)
    Two of those do look nice though...


    Moto
  5. LukyXenos said:
    Hello,
    This is the Gaming PC I want to build, but will all of this stuff fit in this case?

    Case: Cooler Master Storm Scout

    CPU: Intel Core i5 2500 (4 x 3.3GHz) 6MB

    Memory: Corsair 8GB XMS3 PC3-10666 1333MHz (2x4GB)

    Graphics Card: ATI Radeon HD 6950 2GB

    Motherboard: Gigabyte GA-Z68MA-D2H-B3 (Intel Z68)

    Network Card: Edimax Wireless LAN 300Mbps (PCI-E)

    Power Supply: Corsair 700W Gaming PSU

    Thanks.


    yes i have the case and its actually got plenty of space. spend the extra few dollars and get the 2500k
  6. Sorry, I just took my side panel off to measure my cards before posting my reply, that brand/variant of 6950 is not going into the case op selected withough some modding,
    luckily removing that cage looks easy enough
    Moto
  7. Motopsychojdn said:
    Only one? hehe
    those are the very beasties I was referring to, a shade under 30Cm

    So no, that will not fit in your case without some modding of the drive cage,
    http://www.coolermaster-usa.com/landing/scout/faq.php

    *Quote from that link,
    What is the maximum length graphics card supported?
    The CM Storm Scout is designed with portability in mind. It can accommodate the largest 280GTX or HD 4870 X2 type cards. This includes all GPU 10.5" or 267mm in length or shorter. GPU cards have a maximum clearance for 10.6" or 270mm maximum length inside the Scout**

    different card or case, or some modding on the horizon mate :)
    Two of those do look nice though...
    http://i136.photobucket.com/albums/q172/Motopsychojdn/Psycho%20Rider/IMAG0350.jpg

    Moto


    So therefore would a 27cm / 10.6" card fit inside this case?

    (This one) :

    http://www.amazon.co.uk/gp/product/B004L5XZBQ/ref=s9_simh_gw_p147_d0_g147_i1?pf_rd_m=A3P5ROKL5A1OLE&pf_rd_s=center-2&pf_rd_r=0Z8F5S4WFJS0WPZZ4676&pf_rd_t=101&pf_rd_p=467128533&pf_rd_i=468294
  8. Its right on the measurement so I'd say it will be a squeeze-in job,
    but thats according to the links, you may find that the drivecage has enough flex to fit it in withouth cutting/removing anything,
    if you get that one I would fit the mobo, then see if the card is easily fittable, that way you could return it or start planning a mod to suit
    Moto
  9. Motopsychojdn said:
    Its right on the measurement so I'd say it will be a squeeze-in job,
    but thats according to the links, you may find that the drivecage has enough flex to fit it in withouth cutting/removing anything,
    if you get that one I would fit the mobo, then see if the card is easily fittable, that way you could return it or start planning a mod to suit
    Moto


    Ok, I'll try doing that.
    Thanks for all your help.
    Xenos
  10. Better yet, look at some of the Rosewill or Antec cases. CM is a dishonest company, which IMHO does not deserve anyone's business, regardless of the product or its quality. HardwareSecrets found that some of their PSUs have liar-labels or claim protections that are missing. Since the government is not interested in pursuing consumer fraud of this sort, your only option is to vote with your dollars.
  11. COLGeek said:


    Thanks, this looks good / better than the other card.
    Xenos
  12. LukyXenos said:
    Thanks, this looks good / better than the other card.
    Xenos

    It should give you .4 inch to spare as this GPU is 10.2 inches long.
  13. COLGeek said:
    It should give you .4 inch to spare as this GPU is 10.2 inches long.


    Yeah it should. Thanks again.
    Xenos
  14. remove the hdd cages u dont need and its fine. really easy fit.
Ask a new question

Read More

New Build Gaming Cases Systems