Sign in with
Sign up | Sign in
Your question

Constant BSODs 11.9-11.12 5770

Last response: in Graphics & Displays
Share
December 31, 2011 3:03:10 PM

I get constant blue screens using any ATI drivers past 11.8, ive just upgraded my pc with a brand new motherboard, cpu and ram and im still getting the blue screens. This is a completely fresh install of windows 7 64bit ultimate SP1. I had the same problem on my old hardware and its becoming a real pain in the arse. It actually crashes immediately after installing the driver and restarting the pc, i generally have to load in safemode and delete the driver using device manager.

Ive searched google for hours trying to find something to help me on this problem, so far ive found nothing.

Current hardware
MSI P67A-GD55-B3
Intel I5-2500k
XFX HD 5770 1GB
G-Skill 8GB (2x4GB) DDR3 1600Mhz RipjawsX
500Gb maxtor (stm3500320AS)(system drive)
1TB SAmsung F1
1TB samsung F3

My old system was similar except a Q6600, 3GB 800mhz ram a motherboard which i cannot remember at this time (can find out if requested)

I experience the constant and rapid BSODs on both system configurations using fresh installs of windows 7 ultimate 64bit SP1 with i believe all ATI drivers from 11.9 to 11.12. I try each new driver as they are released yet each one results in the same constant BSODS.

Any help or advice would be appreciated.

More about : constant bsods 5770

December 31, 2011 3:12:29 PM

Not allowed to edit my post for what ever reason, however ive installed 12.1 preview drivers and chose not to install the CCC manager, no BSODS. Its highly possible that CCC was the direct cause of the BSODS. Im sure i remember disabling CCC from starting in MSconfig with 11.12 and the PC booted without BSODs on a previous Windows install, which has only just come to my attention after i tried the install without CCC
!