We recently moved 8 pc's from a room where they each had port to the the switch into a room where there is only one port for all of them. I setup a DLINK DIR632 broadband 8 port Wifi router in there and they connect thru the one port thru the switch to the gateway (which gets them out to the internet.)
The problems are; I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer on this side of the switch. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on and serving the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network. I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure. Any help would be appreciated.
The problems are; I need to be able to remote desktop into these 8 PC's and I need them to be able to print to the network printer on this side of the switch. I am using a Linksys WRT54G Broadband router as the gateway connecting the switch to the internet. The DLINK's dhcp server is on and serving the 8 PC's. The Linksys' dhcp server shows the DLINK as IP 192.168.1.19 on the network. I know I have to use advanced routing settings but I'm not sure about how what to make the subnet mask and IP's on both routers. I believe I need to turn off the dhcp server on the DLINK and have the Linksys' dhcp server serve all of the PC's but I'm not sure. Any help would be appreciated.