Archived from groups: rec.photo.digital (More info?)
Hi all
I've just purchased my second Fuji Finepix F440 camera as I'd like to
try and make a digital stereo camera. However I'd like to remove the
small clip on the side which takes the carrying strap.
I can undo the 4 small screws on each side of the camera but the screws
on the bottom are not the standard '+' screws, they have 3 slots from
the center instead of 4. Does anyone know where I can buy such a driver?
- My only alternative is to try and return the camera to Fuji but as it
isn't actually broken, I'm wondering if it's paid for under the
guarantee.
Archived from groups: rec.photo.digital (More info?)
Stewy wrote:
> Hi all
>
> I've just purchased my second Fuji Finepix F440 camera as I'd like
> to try and make a digital stereo camera. However I'd like to remove
> the small clip on the side which takes the carrying strap.
>
> I can undo the 4 small screws on each side of the camera but the
> screws on the bottom are not the standard '+' screws, they have 3
> slots from the center instead of 4. Does anyone know where I can buy
> such a driver? - My only alternative is to try and return the camera
> to Fuji but as it isn't actually broken, I'm wondering if it's paid
> for under the guarantee.
>
> Any advice would be appreciated.
Get a security set of driver bits.
--
neil
delete delete to reply
Archived from groups: rec.photo.digital (More info?)
Just visit pretty much any electronic/hardware store and look for a
collection of 'specialty' screwdriver bits - they are often quite
cheaply sold in disposals stores here in Oz.. The one you want is
called a tri-wing I think, but you will also need to get the right
size...
Unless Fuji have got a proprietary one of their own, but I doubt it.
Archived from groups: rec.photo.digital (More info?)
Stewy wrote:
> the screws
> on the bottom are not the standard '+' screws, they have 3 slots from
> the center instead of 4. Does anyone know where I can buy such a driver?
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.