Sign in with
Sign up | Sign in
Your question
Solved

ANTEC 300 Power button horrible

Last response: in Components
Share
June 24, 2012 12:33:29 PM

I am using an Antec 300 for a recent build

One thing that greatly annoys me is that almost everytime i push the on button, it gets stuck 'in' and i have to smack the top of my front panel to get it to 'spring back'

I've tried the insides with compressed air and nothing helps.

Does anybody know how i can overcome this?

thanks in advance
July 10, 2012 2:16:39 AM

hmm sounds weird I own three antec 300's and none of them had this problem. You might want so see if something is obstructing the button or maybe try using a plastic safe lubricant very lightly on the area.

If its a new case and the switch is that annoying you mights want to just RMA it. Hope you can get it fixed and good luck.
July 10, 2012 2:33:23 AM

If you can't get Antec to send you a replacement switch, I'd RMA the case back to the retailer you bought it from with the explanation as to what is wrong.
Related resources
July 19, 2012 11:03:11 AM

thanks for the replies guys,

I dont think its worth returning and its only a minor problem.

I will use some plastic safe lubricant on the inside of the switch and hopefully that will fix the problem.

I'm probably going to buy an Antec DF-85 at the end of the year for better cooling/cable management/features etc.

cheers

Best solution

July 20, 2012 5:58:42 PM
Share

Hi there, I'm an Antec Customer Support Rep, please send me an e-mail to vip@antec.com

I can order you a power switch for your Three Hundred case

Thanks
July 22, 2012 5:35:40 AM

Hello,

Thankyou for your reply.

I'll be sure to send you an email regarding a new power switch for my case.

Thankyou
August 2, 2012 2:01:49 PM

Best answer selected by IIXxReCoNxXII.
!