Sign in with
Sign up | Sign in
Your question

FreeNas

Tags:
  • Homebuilt
  • Storage
  • Systems
Last response: in Systems
Share
March 24, 2012 7:16:16 PM

The PC that I have been running “FreeNas” on just went down the other day. I pulled the storage drive to keep all of the file safe. Then, I re-installed FreeNas and set it all up again, and that went fine.
The problem is, when I put the storage drive back in, it doesn’t recognize it. It sees it when I go to view all volumes and gives me this
Storage /mnt/Storage None (Error) Error getting available space Error getting total space DEGRADED
When I try to create a new path to this drive it does not show up in the browser
When I try to import the Volume, it sees it but says “the is a problem labeling the volume”
Of course, I can’t create a new volume without losing all of my files.
What do I need to do to either get FreeNas to access the drive
Or just get the files off to another drive?

More about : freenas

a c 113 B Homebuilt system
March 25, 2012 7:04:44 AM

I would get the files from it if at all possible. You could try booting from UBCD and see if you can get a recovery that way, or you can do a search for UFS recovery tools... that is the type of file system FreeNAS uses.
m
0
l
March 25, 2012 7:47:17 AM

Were you running RaidZ or any raid mode, are the drives back in the ports they came out of?
m
0
l
!