Solved

Hyper 212+ evo FEEDBACK

Hello Guys,

I bought a CM hyper 212+ evo, had a hard time installing it:( to cut the story short, my temp read 58-61C with stock cooler, then installed hyper 212+ evo, ran prime95, temp read 46C max via HWmonitor (UN-OC'ed) just asking if i've installed it properly and this should be the result that i should be getting. My specs are:

-Asus M5A88V-evo
-AMD Athlon II X3 455 @ 3.3GHz (Vcore: 1.452 via CPU-Z; this is the default value given by the BIOS so no undervolting has done on this system)
-Kingston Hyper X 8GB (2x4GB) 1600MHz
-CM Extreme Power Plus 500W

Thanks in advance for your responses!
4 answers Last reply Best Answer
More about hyper feedback
  1. thanks for the quick response sir:) hopefully it stays the same. this cooler was recommended by most of the tech guys here. i got a generic casing so i'm leaving the side panel open since i cannot close it with the evo installed. by the way, 58-61C is also @ 100% full load using stock cooler. then after running prime95 using evo, i got 43-46C. am i good at OCing this CPU? can someone give me a step by step procedure on this since this is the first that i'll be doing this. thank you so much @ct1615
  2. sir, if you don't mind, can you help me how to do that? what's the first step that i have to do in the bios and what to look for. thanks! appreciate it
  3. Best answer
    this video will help you out, since your CPU is not a "black edition" the multiplier options would not be open for you

    http://www.youtube.com/watch?v=4kQXQPJSzZg
  4. Best answer selected by cReed_eRos.
Ask a new question

Read More

CPUs Evo