I have this case http://www.ultraproducts.com/product_details.php?cPath=13&pPath=250&productID=251 i currently have the 12CM fan in the rear set to exhaust, and the 8CM duct fan to intake. Other than the CPU fan and PSU's fan i have no other fan in the case. My 6300 with stock cooling OCed to 2.8 seems to be running a bit hot to me.
Should i have the 12CM fan blowing in instead of out? Also should i add an 8CM fan to the bottom front (there is a spot for it behind the bezel)? If so should it intake or exhaust? Should i also try to jerry rig another 8CM (or two) under the duct fan in the vent holes on the side panel, and if so intake or exhaust? Would any of these things help me lower my temps at all? Thanks in advance.
Should i have the 12CM fan blowing in instead of out? Also should i add an 8CM fan to the bottom front (there is a spot for it behind the bezel)? If so should it intake or exhaust? Should i also try to jerry rig another 8CM (or two) under the duct fan in the vent holes on the side panel, and if so intake or exhaust? Would any of these things help me lower my temps at all? Thanks in advance.