Hello,
My FlatScreen TV went Black – couldn’t bring up the menu but still had sound. TV is 32” Samsung Model = LN-S3251D, I replaced Swollen Caps and tried turning it on, it would flash Blue and then go black, my son tapped somewhere by the main circuit board and it came on so I hooked it up to cable, reset channels etc. – It ran for 3 Hours, then when I turned it off & on again it flashed Blue screen and then went black. I then ordered rebuilt power board and installed, when turned on it flashed Blue screen and then went black again. I then tapped the top connection cable of the Main circuit board – the TV came on Blue Screen and I could get the menu, I then cycled it off & on 3 or 4 times with NO problems, so I turned it off and connected the signal cable, when I turned it back on it was Black Screen again.
My FlatScreen TV went Black – couldn’t bring up the menu but still had sound. TV is 32” Samsung Model = LN-S3251D, I replaced Swollen Caps and tried turning it on, it would flash Blue and then go black, my son tapped somewhere by the main circuit board and it came on so I hooked it up to cable, reset channels etc. – It ran for 3 Hours, then when I turned it off & on again it flashed Blue screen and then went black. I then ordered rebuilt power board and installed, when turned on it flashed Blue screen and then went black again. I then tapped the top connection cable of the Main circuit board – the TV came on Blue Screen and I could get the menu, I then cycled it off & on 3 or 4 times with NO problems, so I turned it off and connected the signal cable, when I turned it back on it was Black Screen again.
Facebook
Twitter
Instagram