I have two old CRTs both Veiwsonic the A90f and A95f. one is plugged into my 9800GT and the other the internal Nvidia 980a.
Both have the most up to date drivers.
the problem im experiencing is that the monitor plugged into the internal card is
getting this weird anomaly where it looks like its opening or running a program for a fraction of a second.
It will do this for maybe 2 seconds at a time every 5-60 seconds
The screen flickers and glitches out without any noticeable lasting effect other than to piss me off
.
It only starts doing it after my computer has been in sleep mode or if I have had that monitor turned off for a while.
If I "remove" and then reinstall the device the problem goes away for a few minutes.
If I uninstall the drivers and reinstall them it goes away for a few minutes.
The problem looks most like if a some sort of command line bat or some sort ofr whatever thingy is running for a few milliseconds.
Naturally I tried to see if it would show up in taskmanager... nothing...
I have scanned my system with the most up to date version of PCTOOLS spyware doctor virus protection and run multiple "chekups" with toolwiz.
Ive come to the conclusion that it is not a program or virus issue but possibly some sort of memory failure or driver conflict thats causing the problem.... Im betting theres possibly some way to adjust my registry to correct the problem
PLEASE help its super duperly annoying.
below is a paraphrased dxdiag
let me know if there is anything else I can provide:
------------------
System Information
------------------
Time of this report: 1/27/2012, 22:56:43
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-7612
BIOS: Default System BIOS
Processor: AMD Phenom(tm) II X4 955 Processor (4 CPUs), ~3.2GHz
Memory: 16256MB RAM
Available OS Memory: 16256MB RAM
Page File: 3797MB used, 28711MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Card name: NVIDIA GeForce 9800 GT
Manufacturer: NVIDIA
Chip type: GeForce 9800 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0614&SUBSYS_18611462&REV_A2
Display Memory: 4069 MB
Dedicated Memory: 997 MB
Shared Memory: 3071 MB
Current Mode: 1280 x 1024 (32 bit) (75Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: A90f
Monitor Id: VSCA206
Native Mode: 1280 x 1024(p) (75.025Hz)
Output Type: HD15
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0012.8562 (English)
Driver Version: 8.17.12.8562
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 10/15/2011 03:53:00, 15693120 bytes
WHQL Logo'd: Yes
Both have the most up to date drivers.
the problem im experiencing is that the monitor plugged into the internal card is
getting this weird anomaly where it looks like its opening or running a program for a fraction of a second.
It will do this for maybe 2 seconds at a time every 5-60 seconds
The screen flickers and glitches out without any noticeable lasting effect other than to piss me off
. It only starts doing it after my computer has been in sleep mode or if I have had that monitor turned off for a while.
If I "remove" and then reinstall the device the problem goes away for a few minutes.
If I uninstall the drivers and reinstall them it goes away for a few minutes.
The problem looks most like if a some sort of command line bat or some sort ofr whatever thingy is running for a few milliseconds.
Naturally I tried to see if it would show up in taskmanager... nothing...
I have scanned my system with the most up to date version of PCTOOLS spyware doctor virus protection and run multiple "chekups" with toolwiz.
Ive come to the conclusion that it is not a program or virus issue but possibly some sort of memory failure or driver conflict thats causing the problem.... Im betting theres possibly some way to adjust my registry to correct the problem
PLEASE help its super duperly annoying.
below is a paraphrased dxdiag
let me know if there is anything else I can provide:
------------------
System Information
------------------
Time of this report: 1/27/2012, 22:56:43
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110622-1506)
Language: English (Regional Setting: English)
System Manufacturer: MSI
System Model: MS-7612
BIOS: Default System BIOS
Processor: AMD Phenom(tm) II X4 955 Processor (4 CPUs), ~3.2GHz
Memory: 16256MB RAM
Available OS Memory: 16256MB RAM
Page File: 3797MB used, 28711MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: 120 DPI (125 percent)
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
Card name: NVIDIA GeForce 9800 GT
Manufacturer: NVIDIA
Chip type: GeForce 9800 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0614&SUBSYS_18611462&REV_A2
Display Memory: 4069 MB
Dedicated Memory: 997 MB
Shared Memory: 3071 MB
Current Mode: 1280 x 1024 (32 bit) (75Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: A90f
Monitor Id: VSCA206
Native Mode: 1280 x 1024(p) (75.025Hz)
Output Type: HD15
Driver Name: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver File Version: 8.17.0012.8562 (English)
Driver Version: 8.17.12.8562
DDI Version: 10
Driver Model: WDDM 1.1
Driver Attributes: Final Retail
Driver Date/Size: 10/15/2011 03:53:00, 15693120 bytes
WHQL Logo'd: Yes
Facebook
Twitter
Instagram