Need Help Badly With My Build

Okay so this is the problem i had my whole build done except for installing windows. I went to go and do the post boot and i come to find out that my monitor wont pick up a signal from the computer. I tested the monitor on my other desk and the monitor worked fine. i tried post booting again and still no signal. So i was wondering if any of you would know how to fix this issue.
6 answers Last reply
More about need badly build
  1. Could be a graphics card issue. What are your system specifications, please.
  2. xunicronx said:
    Could be a graphics card issue. What are your system specifications, please.



    My specifications are:

    AMD FX-8150

    ASUS Crosshair V Formula AM3+ AMD 990FX

    EVGA GeForce GTX 560 Ti - 448 Cores (Fermi) Classified Ultra 1280MB

    Mushkin Enhanced Chronos 2.5 120GB SATA III MLC Internal Solid State Drive

    LITE-ON Black Internal 12X Blu-ray Combo SATA Model

    Microsoft Windows 7 Home Premium SP1 64-bit - OEM

    ASUS VS Series VS247H-P Black 23.6" 2ms LED Backlight Widescreen LCD Monitor

    FSP Group AURUM GOLD 750W (AU-750M) ATX12V/EPS12V Modular Flat Cable, 80 PLUS GOLD, SLI and AMD CrossFireX Certified
  3. What about ram?
  4. GI_JONES said:
    What about ram?



    CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ16GX3M2A1600C10

    sorry about that. :??:
  5. Sounds like a RAM issue. Is the MEM OK LED light on when you power on? If not I would take one DIMM out and starting with the first slot , see if you can POST. Repeat for all 4 slots.

    Support page for your mobo:

    http://support.asus.com/knowledge.aspx?SLanguage=en&p=1&s=24&m=Crosshair%20V%20Formula&os=&hashedid=Ntfy5ioh5wbNOXsP
  6. upsguy1974 said:
    Sounds like a RAM issue. Is the MEM OK LED light on when you power on? If not I would take one DIMM out and starting with the first slot , see if you can POST. Repeat for all 4 slots.

    Support page for your mobo:

    http://support.asus.com/knowledge.aspx?SLanguage=en&p=1&s=24&m=Crosshair%20V%20Formula&os=&hashedid=Ntfy5ioh5wbNOXsP



    I have done a test boot before and it said the mem was okay but now when I try to do a test the computer won't send a signal to the monitor.
Ask a new question

Read More

Homebuilt Monitors Build Systems