Build is having issues

[mdhodge2]

Hello All,

I recently built a computer with the following specs.

*Intel i7 2600
*H70 CPU Cooler
*120 ssd
* 2x 6970
*P67 Deluxe Motherboard
*1000W Cooler Master PSU
*16GB RAM
*NZXT Phantom case
*Basic 20ish dollar CD/DVD drive
*Windows 7 Pro 64 bit

Everything seemed to run great and no issues have been found....

Unfortunately, on Civilization 5 my computer will actually reboot seemingly at random—it also happened once on Dungeon Siege 3. I have attempted to isolate the problem by using PassMark, but the computer passed with no issues. I figured maybe I was having a cooling or PSU problem. However, I ran furmark for three hours on maximum settings full screen and the computer had no problems. The temperature was stable (88ish per card) and it never crashed. I am at a loss for what the problem can be. My next step is to reinstall windows. Can anyone offer any insight into the problem?
Thank you for your assistance!

 

[aicom]

Did you check your CPU temperature too? Try running Prime95 and see if you can get it to reboot.

 

[mdhodge2]

Did you check your CPU temperature too? Try running Prime95 and see if you can get it to reboot.

Thank you for the response. I have been watching CPU temps too. It does not seem to get up. I will run prime95 to see if I can get a crash.

 

[mdhodge2]

I have been running the program for over an hourish now and have not yet seen a crash. The CPU temp is holding at 56-57 degrees. The CPU is liquid cooled and it seems to be working effectivly. Thank you for your input though.