Voltage Problems ?

[4sdf]

I just noticed this voltages in AIDA64, i don't know anything about power supplies . you guys can help me with that please ? That voltages are wrong? They can be dangerous ?

If they are dangerous, what i can do to fix them ?

 

[jay_nar2012]

Your CPU voltage seems fine but your 5v and 12v rails seem off by a margin.
14.9v is too high for the 12V rail and 3.1V is too low for the 12V rail.
http://superuser.com/questions/132730/what-are-good-values-for-psu-voltages

 

[rolli59]

If that program was right your PC would not be running. Find different way to read your voltages, a multi meter will be most accurate but many boards display voltages in BIOS.

 

[4sdf]

If that program was right your PC would not be running. Find different way to read your voltages, a multi meter will be most accurate but many boards display voltages in BIOS.

I just checked the voltages in BIOS and they look normal. 12V rail = 12.3v and 5V rail = 5.2v

Thank you very much

 

[scout_03]

try this to get more details on your system it's free http://www.hwinfo.com/

 

[4sdf]

try this to get more details on your system it's free http://www.hwinfo.com/

I get the same wrong reads in that program, but in the BIOS the voltage reads are normal. I don't know what happens.

 

[rolli59]

It is a common problem with third party monitoring software.

 

[4sdf]

Thanks to everyone for your help

 

[4sdf]

Best answer selected by 4sdf.