Sign in with
Sign up | Sign in
Your question

Silver Fittings

Last response: in Components
Share
August 1, 2012 12:01:30 AM

Im planning on buying a swiftech h20-220 for a new build and wanted to know what fittings to get? :bounce: 

More about : silver fittings

August 1, 2012 12:56:15 AM

It would depend on wat kind of look that you want for the system. Is the side panel have a window to see the inside?
There are two types of fittings the standard barb itting and the compression fitting. The compression fitting gives you the clean look and there are no clamps needed , just slide the tubing over the fitting and tighten down the compression ring.
This online store has a big selection of water cooling parts and the Bitspower fittings are some of the best , you can send a lot of time on that site looking through the inventory. Th Bitspower fittings come in avariety of colors from black to black spkle to silver shinning. Then you haveother manufacturers that make colors like ed , blue , green and gold and those arethe Mosoon fittings , which I have tried and was not impressed. I will stick with Bitspower and XSPC.

http://www.performance-pcs.com/catalog/index.php?main_p...

http://www.performance-pcs.com/catalog/index.php?main_p...

Swiftech has ssme good fittings also.

http://www.performance-pcs.com/catalog/index.php?main_p...

m
0
l
August 1, 2012 1:12:18 AM

inzone said:
It would depend on wat kind of look that you want for the system. Is the side panel have a window to see the inside?
There are two types of fittings the standard barb itting and the compression fitting. The compression fitting gives you the clean look and there are no clamps needed , just slide the tubing over the fitting and tighten down the compression ring.
This online store has a big selection of water cooling parts and the Bitspower fittings are some of the best , you can send a lot of time on that site looking through the inventory. Th Bitspower fittings come in avariety of colors from black to black spkle to silver shinning. Then you haveother manufacturers that make colors like ed , blue , green and gold and those arethe Mosoon fittings , which I have tried and was not impressed. I will stick with Bitspower and XSPC.

http://www.performance-pcs.com/catalog/index.php?main_p...

http://www.performance-pcs.com/catalog/index.php?main_p...

Swiftech has ssme good fittings also.

http://www.performance-pcs.com/catalog/index.php?main_p...


There is a side window and if the fitting a white color would be good for a black and white color scheme but silver would be fine.Also the cleaner look inside the better.
m
0
l
Related resources
August 1, 2012 1:16:06 AM

That site will have a lot of options for you and there is another one but thier prices are a little bit higher and they also have a good selection.

http://www.frozencpu.com/

I buy from these two sites for water cooling and anything else that I don't get from Newegg.
m
0
l
August 1, 2012 1:19:48 AM

what fitting do i get for the tube?
m
0
l
August 1, 2012 1:34:35 AM

Also would this fitting (Bitspower Ultimate G 1/4 Thread 1/2" ID x 3/4" OD Compression Fitting - White) be a natural anti microbial?
m
0
l
August 1, 2012 3:13:38 AM

cookieninja said:
Also would this fitting (Bitspower Ultimate G 1/4 Thread 1/2" ID x 3/4" OD Compression Fitting - White) be a natural anti microbial?



Where did you see a White Bitspower compression fitting? The only natural anti-microbal fitting would be made out of silver.
m
0
l
August 1, 2012 5:17:13 AM

Use PTNuke or a silver kill coil!
m
0
l
August 1, 2012 5:20:38 AM

Also how do u install the fitting?
m
0
l
August 1, 2012 5:28:29 AM

amuffin said:
Use PTNuke or a silver kill coil!


can you plz show me a link to where i can buy some?
m
0
l
!