Will it fit cooler master hyper 212 plus

[krookedt]

hello all, I am about to get a cooler master hyper 212 plus and was wondering if it will fit my mobo or even in my pc case... my mobo is a dell 0cu409 with 4 slots for ram (3 occupied) and a radeon hd4650 graphics card, cpu is a intel core 2 duo e6600. and I think my case is a compaq presario sr5410f mid size atx the dimensions are... about 14 1/2 inches high, 6 1/2 inches wide, and 16 inches long... any help with this would greatly be appreciated.

thanks

 

[raytseng]

http://www.coolermaster.com/product.php?product_id=6603

here are the specs.

158.5mm high. Grab a ruler and cut out a template from paper or cardboard and see if it will fit.

 

[Dark Lord of Tech]

Dimensions
16.77" x 14.85" x 6.67" < compaq presario sr5410f

 

[Dark Lord of Tech]

Your case is 6.67 inches wide and the cooler is 158.5mm. which equals 6.24 inches.I doubt it would squeeze into that case.

 

[Fender0246]

Your case is 6.67 inches wide and the cooler is 158.5mm. which equals 6.24 inches.I doubt i would try to squeeze it in.

On top of that, add motherboard+CPU thickness, gap between case and motherboard tray, and gap between motherboard and motherboard tray via stand-offs. That'll probably put it over the limit.

 

[rocknrollz]

It will not fit, my case is 7.5 inches and the hyper 212+ has only a few mm left.

 

[krookedt]

thanks alot guys I really appreciate the answer, I am just gonna wait till I can grab a full size case.

thanks again

 

[Dark Lord of Tech]

Your welcome.

 

[Dark Lord of Tech]

Best answer selected by Area51reopened.

 

[Dark Lord of Tech]

This topic has been closed by Area51reopened