/ Sign-up
Your question

1500$ PC for 3d simulations and gaming

  • New Build
  • Gaming
  • 3D
  • Systems
Last response: in Systems
May 6, 2012 9:30:36 AM


Need an advice on building a 1500$ system. Primary use would be 3d simulations and rendering as well as some serious gaming.

Approximate Purchase Date: within a week

Budget Range: 1500$ (80-85k in india)

System Usage from Most to Least Important: 3d simulations and rendering as well as some serious gaming.

Parts Not Required: monitor, speakers

Country: India)

Overclocking: Yes

SLI or Crossfire: Maybe

Monitor Resolution: 1920x1080

Additional Comments: I would like a quiet PC


As of now following is the configuration I might consider..

Intel Core i7 2600K Sandy Bridge 3.4GHz

Asus Maximus V GENE or GIGABYTE GA-Z77X-UD5H or ASRock Z68 Extreme3 Gen3 (actually need suggestions)

Western Digital 2TB 64MB, 7200 RPM Caviar Black

CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 1600 (PC3 12800) Model CMZ8GX3M2A1600C9 x 2 = 16GB

gigabyte GV-N560SO-1GI super clocked (suggest)

Corsair Hydro Series H100

Suggest computer case and PSU...

Awaiting your suggestions mates!!!


More about : 1500 simulations gaming

May 6, 2012 9:57:52 AM

3D simulations and rendering? Thats a very vague description. To what extent you plan to do simulations?
May 6, 2012 9:59:45 AM

The point is i would want a good core power.. :) 
May 6, 2012 10:30:59 AM

which motherboard would be giving the best performance out of the specified ones..
Also pls suggest due to high overclocking say 4.5ghz on 2600k will i be needing a corsair H100 or can settle down on some other cooling device.