PLEASE HELP!!!

[pchavez5701]

[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:54 pm] CPU fan 0 Abnormal
[04/20/2012 at 11:08 pm] CPU fan 2486 Normal
[04/29/2012 at 08:29 pm] CPU fan 0 Abnormal
[04/29/2012 at 08:29 pm] CPU fan 0 Abnormal
[05/08/2012 at 01:47 am] +5V 0.040 Abnormal
[05/08/2012 at 01:47 am] +5V 5.080 Normal
[05/08/2012 at 07:05 pm] +3.3V 1.120 Abnormal
[05/08/2012 at 07:05 pm] +3.3V 3.328 Normal


Im seeing this in the asus probe II in Asus suite, I have had no reboots or anything. I turned Q fan off, and I havent seen an issue in temps really, highest was 70c at 100% load almost. Its all stock cooling

Haf 912
I5 2400k
GTX 560 TI (galaxy)
P68p67 LE Asus board
seagate 500gb hybrid ssd.


Please help. Could it be my psu? I mean 1.120 is dangeriously low.

 

[ncc74656]

what is that 3.3V line going to? do you have some type of power saving setting turned on in the bios or after market program?

 

[pchavez5701]

Asus says 1.120 , i dont have any any after market program or setting in bios turned on that I know of.

 

[ncc74656]

what is receiving 1.12 volts? VTT, CPU, memory, a fan?

 

[pchavez5701]

it doesnt say asus suite is saying its dropping now the 5v rail.



[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:53 pm] CPU fan 0 Abnormal
[04/20/2012 at 10:54 pm] CPU fan 0 Abnormal
[04/20/2012 at 11:08 pm] CPU fan 2486 Normal
[04/29/2012 at 08:29 pm] CPU fan 0 Abnormal
[04/29/2012 at 08:29 pm] CPU fan 0 Abnormal
[05/08/2012 at 01:47 am] +5V 0.040 Abnormal
[05/08/2012 at 01:47 am] +5V 5.080 Normal
[05/08/2012 at 07:05 pm] +3.3V 1.120 Abnormal
[05/08/2012 at 07:05 pm] +3.3V 3.328 Normal
[05/08/2012 at 11:22 pm] +5V 10.200 Abnormal
[05/08/2012 at 11:22 pm] +5V 5.080 Normal
[05/09/2012 at 10:50 am] +5V 10.200 Abnormal
[05/09/2012 at 10:50 am] +5V 5.080 Normal
[05/09/2012 at 11:55 am] +5V 0.000 Abnormal
[05/09/2012 at 11:55 am] +5V 5.120 Normal

 

[ncc74656]

on my 5V sensors right now only one is above 1.2V. its built in power saving functions on the MB. with out knowing exactly what component is supposedly getting under the 5 or over the 5 there is no way to know if this program is correct. it says abnormal for any voltage that is off of the preset 5 or 3.3 or 12. no computer runs with all inputs at a static number, they vary greatly depending on load, clock speeds, personal settings... i would put next to no stock in this asus program that is saying this are wrong. if the comp is stable (run prime 95 for a day to find out) then the MB/CPU/ram, dont have voltage issues. if you can play games with out crashing then the video card should be good as well. short of having any kind of system instability i would not worry about these readings.

are you having any issues with the stability or fan speeds?

 

[pchavez5701]

on my 5V sensors right now only one is above 1.2V. its built in power saving functions on the MB. with out knowing exactly what component is supposedly getting under the 5 or over the 5 there is no way to know if this program is correct. it says abnormal for any voltage that is off of the preset 5 or 3.3 or 12. no computer runs with all inputs at a static number, they vary greatly depending on load, clock speeds, personal settings... i would put next to no stock in this asus program that is saying this are wrong. if the comp is stable (run prime 95 for a day to find out) then the MB/CPU/ram, dont have voltage issues. if you can play games with out crashing then the video card should be good as well. short of having any kind of system instability i would not worry about these readings.

are you having any issues with the stability or fan speeds?

not that I know of and I play games mostly, never had a crash. installed a new fan to the case using molex and runs fine from power supply. I hear asus probe is a bad program.

 

[ncc74656]

then im sure you are fine. its sort of like if your check engine light came on due to your engine being to cold right after you started it. thats what this program is doing, your computer does not need full power and thus is using less and the program is freaking out because the voltage is not with in its pre-programmed norms.