Sign in with
Sign up | Sign in
Your question
Solved

Corsair 600T with two 200mm fans and H100

Tags:
  • New Build
  • Fan
  • Corsair
  • Systems
Last response: in Systems
Share
May 16, 2012 3:49:23 PM

Hi everyone!

Please see the pictures and tell me if it is a good idea to install Corsair H100 on the side panel!

http://imageshack.us/g/207/080ug.jpg/

Note: The two 200mm fans are pushing the air in and a 120mm fan plus the H100 are pulling the air out!

More about : corsair 600t 200mm fans h100

May 16, 2012 4:12:53 PM

well you sure can but i would rather take out the top fan and place that one on the side

1x big fan on the side taking in air and 2x120 fans(H100) on the top pulling out the air

thats a good push pull config

i don't like going with the H100 on the side it can get noticeable easy and i want to look at my system for the clear side panel

if you don't really want to look at the inside i would rather suggest 500R. it looks nice and has better cooling than 600T it comes with a big Led side fan and you can have the 500R on top and no one would notice it would be there

500R was pretty much made just for the H100 as how nice it fits inside
m
0
l

Best solution

May 16, 2012 4:16:49 PM

It looks like it's very close on the side panel for space when the side panel is closed and as long as the air flow is ok then it shouldn't matter where you place the fans and cool;er. To me it might make more sense to place the Corsair cooler at the top of the case or at the rear and 200MM fan on the side panel. But it's whatever works for you and if your ok with the way you have it then as I said if the air flow is ok then it should work for you.
Share
Related resources
May 16, 2012 4:34:54 PM

Thanks for the quick replies but there is a small problem... If I install the H100 at the top, the two vengeance rams will not let it fit unless I remove the fans from the H100 and that's not what I want!
m
0
l
May 16, 2012 4:35:54 PM

Best answer selected by johnny42320.
m
0
l
May 16, 2012 6:55:04 PM

Johnny42320 said:
Thanks for the quick replies but there is a small problem... If I install the H100 at the top, the two vengeance rams will not let it fit unless I remove the fans from the H100 and that's not what I want!


i tried it with vengeance heatsinks and i did fit with H100 on top i just had to change the fans from top to bottom
m
0
l
!